End Block Blank - Queensland Maple

An endblock (also called a tail block) is glued into the sides at the butt end of the guitar and also glued to the top and back when they are attached. It forms a strong joint at the end of the guitar as well as an anchor for a decorative endstrip and the endpin. These neck blocks are made from quality straight-grained Queensland Maple and are easy to work. They are around the right size or slightly oversized to be cut down for a guitar end block, they can also be cut down smaller for other instruments. The grain is in the correct direction, traveling in the same direction as the sides. - Minimum size 125mm x 75mm x 22mm (5" x 3" x 7/8") - Quality medium-density QLD Maple - Rectangular blank - Well machined - Grain running is same direction as sides of guitar