Adhesive Sheet for Acoustic Guitar Pickguards

In stock
SKU
PG-021-001
$12.90
  • Buy 3 for $10.70 each and save 17%
This is the best adhesive for attaching acoustic guitar pickguards and is used by many top guitar manufacturers. Make a pickguard out of any thin plastic or timber sheet and use the adhesive to attach it to the top of the guitar. Once you try this adhesive, you will never want to use anything else for attaching pickguards! The adhesive is made by 3M. It is perfectly clear, thin (3-5 mils.), extremely aggressive, tenacious, heat resistant (up to 200°), and waterproof. - 3M brand - 8" x 10" (203mm x 254mm) sheet - Ultra thin - Extremely strong - Clear - Pure adhesive (no tape backing) - Waterproof - For plastic or timber pickguards
INSTRUCTIONS

Application to Pickguard/Scratchplate - Simply unroll to expose the adhesive, apply to the back of the pickguard, trim away the excess with a sharp knife.

Attachment to Guitar - The adhesive is very strong and once it's stuck it probably won't come off. Therefore proper alignment is essential.

Use some small pieces of masking tape to mark the position of the pickguard in a few places on the top of the guitar.

Start by pealing back around 1/3 of the adhesive backing and position the sticky part of the pickguard. Once one end of the pickguard is in place you can work towards the other end, peeling the adhesive as you go.