Bridge Pins - Set of 6 - Black Plastic with Dot

Black plastic guitar bridge pins (bridge pegs) with white dots

- 5.3mm diameter at widest part of taper
- 3.9mm diameter at narrowest part of taper
- 7.4mm diameter at widest part of head
- 32.5mm total length
- 26mm length of tapered peg

Fits most guitars made by -
- Martin
- Gibson
- Maton
- Cole Clark
- Takamine
- Tanglewood
- Most other brands

Bridge pins have a taper and the hole in the bridge should have a matching taper to ensure a good fit. This taper can be made with a bridge pin reamer. If you are replacing the pins on an existing guitar the holes will likely not need any reaming but occasionally they do need reaming to get a good fit.