Dot Inlays - Set of 12 - Mother of Pearl 2mm

In stock
SKU
IN-001-102
$10.80
Mother of Pearl dots for fingerboard side - 2mm diameter - 1.25mm (0.050") thick - 12 pieces - Natural shell White Mother of Pearl is the most common inlay material for the fingerboards of guitars and other stringed instruments. It has a white or light silver colour with a natural iridescence and a subtle beauty. Dots are the easiest inlays to install, they require only a hole drilled into the timber. Always wear a dust mask when sanding and cutting pearl as the dust may be hazardous if inhaled.
We found other products you might like!
White Mother of Pearl dots for fingerboard inlays

To install pearl dots simply drill a hole of an appropriate diameter and depth and then glue the dot in with superglue or epoxy. It's best to use a brad-point or dowel drill bit as it will be easier to position and give a cleaner edge.

Once the glue has dried level the dot to the timber using a hard sanding block or fingerboard radius block with sandpaper attached with double-sided tape. This hard block will help keep the surface level.