Fingerboard Radius Sanding Blocks

These precision sanding blocks are the best tools to get fingerboards to an accurate radius. Use double-sided tape to stick sandpaper to the block and sand your fingerboard to a uniform radius. This is especially useful when levelling pearl inlays. Radius Sanding Blocks can also be used to sand nuts and saddles to profile. RADIUS - The blocks are double-sided with a different radius on each side. There are 3 blocks with a total of 6 different radii. They are available singularly or in a set of 3. SIZE - The blocks are available in two sizes. The standard 200mm blocks are good for most applications. The long 400mm blocks are good for extra accuracy when sanding a full fingerboard, or covering the full length of a fingerboard to hold the frets in during gluing. SECONDS - Second grade blocks are occasionally available at a discounted price. They are downgraded due to an uneven surface or an aesthetic flaw. - Double-sided - Different radius on each side - 8" (200mm) or 16" (400mm) Length - 3" (75mm) Width surface - 3-1/4" (82mm) Total width - Ergonomic curved edges - Made from hard and stable American Rock Maple - High quality