Ibex Bridge Clamp

In stock
SKU
TL-160-002
$98.50
  • Buy 2 for $88.65 each and save 10%
  • Buy 3 for $78.80 each and save 20%
These lightweight aluminium clamps are specially designed for gluing the bridges on acoustic guitars. Ibex Bridge Clamps have a throat that's much deeper than regular clamps, so they can reach the bridge from the soundhole. The lightweight construction doesn't weigh down and distort the top, even when 3 clamps are in use. They can also be used for gluing cracked or loose bracing by clamping it through the soundhole of the guitar. Use 2-3 clamps for best results gluing bridges. - Professional quality - 157mm (6 1/4") throat depth - Strong, lightweight construction - Cast aluminium with steel rod - Made in USA
To glue a bridge onto an acoustic guitar you will need 2-3 clamps. 1 clamp may work for repairs of bridges or bracing.

A clamp should be positioned at each end of the bridge. This is often enough to hold down the entire bridge but if it needs more pressure in the middle a third clamp should be used there.

A caul is often used under the top to spread out the clamping pressure. Small cauls should also be used across the top of the bridge to spread out the pressure of each of the clamps.
More Information
Manufacturer Ibex
Material Aluminium
Tool Type Clamp