Pickguard Blanks for Electric Guitar & Bass - Laminated 3-Ply

In stock
SKU
PG-001-000
Grouped product items
Product Name Qty
Pickguard Blank - Laminated BLACK/White/Black
$29.50
Out of stock
Pickguard Blank - Laminated WHITE/Black/White
$29.50
Pickguard Blank - Laminated Parchment/Black/Parchment
$29.50
Pickguard Blank - Laminated Mint/Black/Mint
$29.50
Pickguard Blank - Laminated Pearl/White/Black
$57.00
Pickguard Blank - Laminated Tortoise/White/Black
$47.80
Use these high-quality plastic blanks to cut a custom pickguard for an electric guitar or bass. The blanks are best cut to shape using a router, but they can also be cut with a standard woodworking saws, drill bits, files and sandpaper. - Gloss 3-ply - PVC plastic material - 285mm (11-1/4") x 240mm (9.5") sheet - 2.5mm (0.1") thickness Available colours: - Black (Black/White/Black laminated for white stripe on edge) - White (White/Black/White laminated for black stripe on edge) - Mint (Mint/Black/Mint laminated for black stripe on edge) - Parchment (Parchment/Black/Parchment laminated for black stripe on edge) - Tortoise (Tortoise/White/Black laminated for white stripe on edge) - White Pearloid (Pearl/White/Black laminated for black stripe on edge)
The conventional way to cut plastic pickguards to shape is using a template and a ball bearing router bit. A straight bit is used for the pickup cutouts and a bevel bit is used for the edges.

If a router isn't available you can use a saw to cut the blanks to shape. The rough edges left by the sawblade should be tidied up with a file or sandpaper then polished through the grades of sandpaper until a satisfactory finish is achieved.