Queensland Maple Tops, Backs & Sides for Concert Ukulele

One Piece Side = One continuous piece minimum 850mm x 71mm x 2.0mm Set of 2 Sides = 2 x bookmatched sides minimum 475mm x 69mm x 2.0mm One Piece Top or Back = One full width piece minimum 310mm x 220mm x 2.5mm - Back, tops & sides to build a Concert ukulele - Top or Back pieces can be used for either top or back - Dried and ready to use We have found that this local timber works very well in ukuleles. Queensland Maple has been used for many years in the Australian guitar industry. Australian guitar manufacturer Maton have used this timber for the backs, sides and necks of most of their steel string guitars for several decades. The timber is lightweight, resonant and easy to work with, making it ideal for backs and sides and necks. Many of the Queensland Maple pieces we stock exhibit beautiful figuring, which gives a finished instrument a stunning look Backs/tops and sides are available for separate purchase. It is common to use the same timber for the top as for the back and sides of a ukulele, in this case order two Tops/Backs and one set of Sides. If you are use using a different timber for the top, order one Top/Back and one set of Sides.