Skip to the beginning of the images gallery

Starbond Super Glue Accelerator

In stock

SKU

EM-ACC-001

$27.50

- Instantly sets cyanoacrylate (super glue) - Sets off thick super glue, such as finish chip touch-ups in minutes - Apply before or after CA glue application - Commonly paired with thicker viscosity CA glues - Non-whitening - glue will dry clear - 2-ounce (58ml) pump sprayer bottle - Extra pump sprayer included - Strong fumes - Use in a well-ventilated area WARNING: This product can expose you to cancer-causing chemicals including N,N-Dimethyl-p-Toluidine. Use in a well-ventilated area and avoid breathing fumes. Starbond accelerator speeds up the drying time of CA/superglue significantly. It sets off thin layers of glue instantly and thicker layers in a fraction of the time they would take to dry naturally. See below for usage information.

Details

For Finish Touch-ups & Chips -
Use Starbond Thin or Medium CA Glue. The thin will flow into shattered finish better.

Position the guitar so the area to be touched up is horizontal.
Build up a thick layer of the glue then spray some accelerator to set off the glue. Repeat as needed to build up enough thickness.

Ideally allow 24 hours for the CA to cure completely, then flatten the area using a hard sanding block with fine sandpaper and polish using polishing compounds.

For Slow-curing Glue Joints -
Some timbers and other materials impede the drying of super glue/CA.

To speed up the drying time while gluing these materials, simply spray some accelerator in the area being joined. The drying time will be reduced to seconds.

Starbond Super Glue Accelerator

About Us

More About Us

Ordering + Shipping

Information

Contact