Peg Hole Reamers & Peg Shavers
In stock
SKU
TL-120-010
- For perfectly fitting pegs & peg holes
- Accurate & fast
- Made by Juzek in USA
- 1:30 taper
- Hardened steel blades
Small Reamer - for violin, viola & flamenco pegs
- Tapers from 4.5mm (0.18") to 9mm (0.36") Diameter
- 180mm (7") Length, 90mm (3-1/2") Pinned timber handle
- 135mm (5-3/8") Blade length
Large Reamer - for cello pegs
- Tapers from 7.5mm (0.3") to 15mm (0.59") Diameter
- 255mm (10") Length, 155mm (6") Pinned timber handle
- 200mm (7-3/4") Blade length
Tuning pegs are tapered in in a slight cone shape, so it's important to make a matching tapered hole for them. A peg hole reamer is perfect for getting the holes sized and shaped.
The three razor-sharp blades effortlessly shave away the inside of the hole until it's the perfect size for the peg. No more loose or stuck pegs!
As pegs can sometimes be a little out of shape when they are manufactured or wear over time, it's best to use our Peg Shaver to get the pegs to a precise taper and diameter before reaming the holes for them.
Related Products
Peg Hole Reamer - It's best to start with a hole drilled a little smaller than the smallest end of the tapered peg.
Simply insert the reamer and turn the handle. As it shaves the inside of the hole out bigger it will slowly drop into the hole. Go slowly as it works very effectively.
Keep checking the hole until you get the prefect fit and position for your peg.
Once you know the perfect position along the reamer for one peg you can use some masking tape to mark the position so you can do the other holes to the same size.
Peg Shaver - The shaver is adjustable in diameter and taper. Adjust both ends until it forms the perfect size and shape. Once you have dialed it in like this you can shave peg after peg all to the same size and taper.
Simply insert the reamer and turn the handle. As it shaves the inside of the hole out bigger it will slowly drop into the hole. Go slowly as it works very effectively.
Keep checking the hole until you get the prefect fit and position for your peg.
Once you know the perfect position along the reamer for one peg you can use some masking tape to mark the position so you can do the other holes to the same size.
Peg Shaver - The shaver is adjustable in diameter and taper. Adjust both ends until it forms the perfect size and shape. Once you have dialed it in like this you can shave peg after peg all to the same size and taper.
| Material | Steel, Wood |
|---|---|
| Tool Type | Reamer |
We found other products you might like!
Powdered Hide glue
Starting at $37.10
