Rubner E110-N-BPO 'El Sonido' Classical Guitar Tuners with Ball-Bearings & Black Pearl Buttons

These are the finest series of tuners from Rubner, featuring ball-bearings and teflon bearings in the friction points to make them smoother and more precise to tune and more long-lasting as well as precision engineered gears and worms at a 1:16 ratio.

Rubner tuners have been used on guitars by Paulino Bernabe, Kenny Hill and Vicente Carrillo.

Price is structured according to the features, level of engraving on the baseplates and the materials used for the button, Pearloid, Ebony, imitation ivory and real Mother of Pearl buttons are used on different models.

REPLACING CLASSICAL GUITAR TUNERS
It's unlikely you will find an exact replacement set for most guitars, especially for older guitars. In this case just choose a set which looks like it will suit the guitar and cover the original screw holes.

Most classical guitar tuners use a standard 35mm (1-3/8") roller spacing centre-to-centre. Some guitars use other spacings. If your guitar has a different spacing you will need to use single tuners, or have a set custom made.

The screw holes often will not line up. If this is the case you can usually drill new holes without any issues. If a hole overlaps but doesn't line up with the new set you will need to fill it and drill a new hole in the correct place.