Grained Ivoroid Plastic Guitar Binding - 1.5mm x 6.0mm x 1320mm

- Traditional imitation ivory - Faintly grained pattern - Celluloid Nitrate plastic - 6mm x 1.5mm x 1320mm (0.24" x 0.06" x 54") - 4 required for 1 guitar body These Celluloid plastic bindings are very flexible, they can be glued in place without pre-bending. A plastic or timber purfling can be used on the inside of the binding to add an extra layer of decoration. The binding rebate can be cut into the edge of the guitar either by hand with our purfling/binding cutter or with a router and binding router bit with a ball bearing of the appropriate size. Plastic glue is best for attaching plastic binding but superglue also works well, especially for short lengths. Our Binding Tape is ideal for holding the bindings in place as the glue dries. Each length will do one edge of a top or back with a off-cut suitable for binding a side of a fingerboard or headstock. 4 pieces are required for a regular acoustic guitar.