Dot Inlays - Set of 12 - Black Plastic 6mm
In stock
SKU
IN-001-406
$10.80
Black Plastic Dots for Maple or other light-coloured fingerboard inlays
- 6mm diameter
- 3.2mm (1/8") thick
- Black Plastic
- For maple or other light-coloured fingerboards
- 12 pieces
- From Allparts USA
Dots are the easiest inlays to install, they require only a hole drilled into the timber.
Black plastic dots are ideal for guitars such as Fender Strats and Teles, which have a light maple fingerboard and need dark dots.
Related Products
We found other products you might like!
Black plastic dots for maple or other light-coloured fingerboard inlays
To install dot inlays simply drill a hole of an appropriate diameter and depth and then glue the dot in with superglue or epoxy. It's best to use a brad-point or dowel drill bit as it will be easier to position and give a cleaner edge.
Once the glue has dried level the dot to the timber using a hard sanding block or fingerboard radius block with sandpaper attached with double-sided tape. This hard block will help keep the surface level.
To install dot inlays simply drill a hole of an appropriate diameter and depth and then glue the dot in with superglue or epoxy. It's best to use a brad-point or dowel drill bit as it will be easier to position and give a cleaner edge.
Once the glue has dried level the dot to the timber using a hard sanding block or fingerboard radius block with sandpaper attached with double-sided tape. This hard block will help keep the surface level.