Fingerboard & Fret Levellers
They are available singularly in two lengths, or as a set. The 16” covers the full length of a fingerboard while the 8” is better for spot levelling or smaller jobs.
Just attach your choice of sandpaper with double-sided tape and rub the leveller lengthways along the fingerboard or fret tops.
- Precision-ground and dead straight (on narrow sides)
- 8" & 16 (200mm & 400mm) Lengths available
- 2" x 1" (50mm x 25mm) Tubular section
- Made from zinc-plated steel
It can be useful to use one of these levellers in combination with a Radius Sanding Block to ensure the fingerboard is both straight and correctly radiused.
|Tool Type||Sanding Block/Leveller|
|Country of Manufacture|